Ball joints are required for a safe and steady driving experience of a vehicle on rocky roads; a good suspension system that provides frictionless movements is a must.
Not just any material or ball joint can come up to OE level. Thorough research is a must need to find the reliable ball joints for your truck.
Ball joints come in kits with an installation process menu, or you just know what you’re doing.
Either way, selecting the best kind isn’t that hard because I will list out some of the best ball joints for RAM 2500 so you can easily pick without further or do let’s dive right in.
Table of Contents
- 1 7 Top Rated RAM 2500 Ball Joints Comparisons
- 1.1 1. Carli Suspension Extreme Duty Ball Joints
- 1.2 2. A-Team Performance New XRF Upper And Lower Ball Joint Kit Set
- 1.3 3. Synergy MFG Ram 03-13 HD Adjustable Ball Joint Kit
- 1.4 4. XRF Lifetime Ball Joint Kit
- 1.5 5. Dynatrac CR92-2X3050-A Pro Steer Ball Joints
- 1.6 6. MOOG K500316 Ball Joint
- 1.7 7. MOOG K7467 Ball Joint
- 2 What To Look For When Buying Ball Joints For Your RAM 2500
- 3 Frequently Asked Questions
- 3.1 Q1. How Long Does It Take To Install A Ball Joint In RAM 2500?
- 3.2 Q2. What Is The Installation Cost Of The Ball Joint For RAM 2500?
- 3.3 Q3. How Do I Replace A Ball Joint In My RAM 2500?
- 3.4 Q4. When Should I Switch Out My Ball Joints Of My RAM 2500?
- 3.5 Q5. Is It Safe To Drive Without A Ball Joint?
- 4 Conclusion
7 Top Rated RAM 2500 Ball Joints Comparisons
| IMAGE | PRODUCT | EDITOR'S RATING | PRICE |
|---|---|---|---|
TOP PICK  | 9.7 | CHECK ON AMAZON | |
 | A-Team Performance New XRF Upper And Lower Ball Joint Kit Set | 9.5 | CHECK ON AMAZON |
 | 9.1 | CHECK ON AMAZON | |
 | 8.8 | CHECK ON AMAZON | |
 | 8.6 | CHECK ON AMAZON | |
BEST BUDGET  | 8.2 | CHECK ON AMAZON | |
 | 8 | CHECK ON AMAZON |
1. Carli Suspension Extreme Duty Ball Joints
1st on my list is the Carli Suspension Extreme Duty Ball Joints.
This product is the best one in the market right now because of its specifications, features, quality, material, and overall warranty.
This set of ball joints consist of upper and lower joints, and they are 100% compatible with both RAM 2500 and 3500.
The manufacture of this ball joint is top-notch and premium compared to all the other joints in its class.
This product offers a long-lasting effect as it has an outer coating of cooper that resists rusting of metals and dusty molding.
Now everything good comes with a price; these joints are a bit on the expensive side but worth every penny.
During the making, these joints go through the process of carbonization, which gives them an extra-strong core and makes them extremely durable.
Along with the making, the working of these joints is very smooth; at first, the 1st drive will be a bit clutched and will feel hard, but as the grease starts to lubricate, the driving process will be smooth and sturdy.
Greasy oils always leave a residue. Another great feature about this particular ball joint is its produces dry lubrication, and no residue is left behind.
The joints come pre-greased before the installation process, which makes them super smooth and easy to put together.
- Cooper coating on the outside gives it a rust-free surface
- Strong and durable
- Pre greased fitting
- More costly than other ball joints
Moreover, this will be a must recommended to all the RAM 2500 lovers out there.
Besides the costly price, these are the best ball joints to use in the market right now; the investment will be worth the experience.
2. A-Team Performance New XRF Upper And Lower Ball Joint Kit Set
2nd on my list is the A-Team Performance New XRF Upper And Lower Ball Joint Kit Set.
First and for most, the main this ball joint has that the first one didn’t was the factor of having an affordable price.
This joint is very affordable for all that it offers. Both the material and building formation of this ball joint is top-notch high quality.
After installing these ball joints, you will start to notice a difference right away.
It provides a steady, smooth, and clear driving experience to all the RAM 2500 lovers. The kit comes with an upper and lower ball joint; they can be easily greased and installed.
In detail, you will receive four balls joint ball upper and lower, with clips to install them.
A quick replacement for a new pair, these ball joints fit perfectly and will get the job done for you.
The features, working, and specification of this joint are very easy to learn and understand you don’t need a professional’s help.
OE parts are said to be the longest-lasting, but a claim by these ball joints has been said to outlast any OE part easily.
New generation Ball Joints designed with a grease-able ball socket on the lowers and grease-able uppers and are one of the most popular ball joints in the market right now to choose from.
- Easy and quick replacement
- Easy to install
- Grease fitting sockets
- Smooth driving
- The joint is not adjustable
Many that have used this joint ball have left good reviews nothing that catches the eye in terms of bad, moreover a great pick for a quick change of joints.
3. Synergy MFG Ram 03-13 HD Adjustable Ball Joint Kit
My 3rd pick for this list is the Synergy MFG Ram 03-13 HD Adjustable Ball Joint Kit for your RAM 2500.
Compared to the last one, this is a bit pricy, but what it’s worth the price is perfect; from the material used to the specification, it provides this ball joint is a favorite pick of mine.
These joints are very strong and durable; even if you do heavy lifting and loading, such as towing a car or rough speed driving, these joints will remain in place, and their performance will be top-notch.
This is why this joint is one of the best for off-road driving; it works with heavy and trashy loads and driving.
For the durable factor, these joints are made using 4140 steel, treated with heat, and induced down to perfection with ferritic nitro-carburized for extra strength and durability.
Compared to the last con, these come with an adjustable cap for the lower ball joint.
Another great feature is that it has a dust boot which keeps all the dust and particle away, and the joint stays clean and has high performance.
The ball joint can also be greased after installation, which gives it an easy maintenance process.
- Top-notch performance
- Heat-treated steel for a stronger and more durable experience
- Comes with a dust boot
- It can be greased after installation
- A bit pricy as compare to other products
A great pick for people who are looking for a more easy maintenance option with lesser to do and quick working.
A bit expensive but lasts a while, so if you’re looking to invest a little extra, go for this one for sure. It has great features and specifications.
4. XRF Lifetime Ball Joint Kit
The XRF Lifetime Ball Joint Kit is the 4th product on this article. This kit comes with four parts, two lower and two upper ball joints along with the clips to install them with ease.
These four parts are for all four sides, installing one for a lesser effect of the joint while installing all 4 for a more hefty effect the features and aspects depend on the driver capabilities.
It has all the main features and works as all the other good and reliable ball joints, from having less friction-producing lubricating grease fitting panel to good and high maintenance effortless riding experience with its amazing top-notch heated metal/steel use.
Usually, such products are heat-treated to make them even more durable and strong.
Just like all the joints, it also comes with a dust boot, it keeps the joint free from trashy material, and the performance is high and steady.
Rust free metals mean long-lasting effects, which is exactly what you want when you put a hefty price on the product, this joint has such features making it very useful.
Although the product offers a great experience for on-road driving, it is not recommended for rocky roads, slimy, sloppy, or any off-road adventures.
It’s strong but not as durable as all the other ball joints in its category.
- Great on-road experience
- Easy to drive with
- Great lubricating method
- Poor quality-wise
If you’re looking for an on-road smooth and steady driving experience for your RAM 2500, this is perfect for you; you will get a very smooth pace experience at a good price, not off-road, though.
5. Dynatrac CR92-2X3050-A Pro Steer Ball Joints
5th up, I have the Dynatrac CR92-2X3050-A Pro Steer Ball Joints. You will most definitely notice a huge difference right when you install this ball joint.
It’s a game-changer in the ball joint world. A bit more pricy compared to the rest, but you will see the result of what you pay for with all the cool and sturdy features and specifications.
One main feature that sets it apart from all the others is it’s a re-buildable ball joint; you can mix and match, change, and remanufacture it to your liking, which makes it super convenient.
These re-buildable parts are made up using the finniest billet steel and treated with heat to provide a lock of extra durability and strength.
Sometimes it so happens a part comes missing, but that can be resolved with this specific joint because its re-buildable features give it a unique specification, and the working can be more fun and exciting for the driver to mess around with.
Another great specification is it has lower seals that keep out all the contamination gunk keeps them clean and running easy and smooth.
This is very important because one of the major problems that arise is blockage of the ball joints due to the left behind residue hence why it goes bad so quickly.
The interior parts are coated with a thick layer of Teflon. If you have older models from 2003-15 and are looking for a long-lasting joint, this one will work the best for you.
The kit contains all four joints for all four wheels, a bit pricy but worth the long-lasting experience.
- Rebuildable parts
- High quality
- Long-lasting
- Only one year warranty
These joints are made using the finniest material like Teflon coating, stainless steel, and chromyl steel, etc. worth the investment if you want a long-lasting ball joint.
6. MOOG K500316 Ball Joint
My 6th pick for this list is the MOOG K500316 Ball Joint.
This ball joint is said to perfectly fit in the RAM 2500 and provides high maintenance driving experience to the driver. This product has a pressed-in cover plate.
This keeps out any dusty particles or nasty gunk of sort to keep the joint nice and clean, and with that, the life span of the joint increases.
Just like all the other sturdy ball joints, this one also has a great specification of grease fitting pre-installation and can also be greased after and also provides a frictionless lubricating oiled effect to make it run smoother and steady.
The working of this ball joint is very steady pace, and as far as warranty goes, the company has assured nothing in particular.
The material used is top-notch and highly fine. These joint have been pre-tested for a few tests to make sure it lasts longer and is available for both foreign approach and domestic approach.
Furthermore, the Belleville preload washer keeps all the parts tight and in place, so no loose ends meet.
This company solely deals with advancing their products to be better than the OE products, which, for the most part, they have done it.
- Easy to install
- Grease fitting for a durable experience
- Run smooth and steady
- Comes with only a single ball joint
A great pick for the RAM 2500 lovers, it has a great fit, runs smoothly, and is easy to install; when you replace the old joint for new ones, the keens of stern come in nothing to be worried about.
It just takes your vehicle and you to get used to, so this product doesn’t have a particular con and is a great pick for the RAM 2500 holders.
7. MOOG K7467 Ball Joint
The last pick for my list is the MOOG K7467 Ball Joint.
These joints are a bit interesting than all the others involved; right off the bat, these aren’t as durable as other pairs, but for what we get for such a low price, it’s a great cheap alternative for a short period.
Installing all four will give you a better boost; many suggest freeing the joints overnight. This makes them cold and dainty, and it’s easier to install this way.
Just like many, this joint also has long-lasting reviews; it also comes with clips to install and remove the joint.
Not looking to buy a very expensive joint and want a quick and easy fix, for the time being, this one’s perfect, and it gives more than the price offers.
Although this product has no comparison to the others in this list, its low price is what makes it worth the say.
Everything about this joint is an average and not that high class, but the on-spot performance for a couple of hours is what makes it so reliable, especially in case of an emergency or accident.
Features, working, and specification are all the same as the others. It just has an additional powdered gusher bearing to keep the car running smoothly on-road and off-road.
- Easy to maintain
- Easy to install if cold
- Quick on the go fix
- It works well if all four are installed
- Cheap quality material
- Not very durable
- Does not last a very long time
Overall it’s a great cheap alternative to the normal, more pricy version; you don’t like to be on the road so often and want a joint that is affordable and easy to maintain this one works perfectly fine for such cases—a great pick for when you just want to tweak your RAM 2500 a little.
What To Look For When Buying Ball Joints For Your RAM 2500
RAM 2500 ball joints are a critical part of the suspension system on your truck.
The ball joint allows the wheels and axle to move in all directions without affecting the alignment of other parts.
You need to replace them when they wear down or become damaged as soon as possible.
This guide will cover some important things to consider when buying ball joints for your RAM 2500.
Should Work With Your Truck
The first thing you should look is that they should work with your truck’s make and model. If you have a RAM 2500, make sure to buy parts that are specifically designed for your model.
You can also check the manufacturer’s website or call them directly if you’re unsure about compatibility. Just looking for the name Ram truck is not enough in this case.
Choose A Durable One
Always try to get the ones that are built with high-quality materials.
This will ensure that it lasts as long as possible and doesn’t wear down easily. The material used should either be made out of hardened steel or equally durable materials.
You should also look for one designed with durability in mind, such as one with bearings, springs, and washers designed to last for a long time.
Check If There Is High Resistance Coating
Make sure to find out if the ball joint you buy for your RAM 2500 has a high-resistance coating.
This will help to protect it from corrosion and rust, which can cause the ball joint to fail quicker.
The coating will usually be made out of zinc, ensuring that the corrosion will be delayed or slowed down as possible.
Choose The Correct Type
There are two options for your RAM 2500 ball joints:
- Sealed
- Serviceable
The main difference between the two is that sealed have grease applied to them, which lasts for a lifetime.
On the other hand, serviceable ball joints have no grease applied to them and require you to add some.
The latter can fail earlier if not taken care of and can last for a longer period if they are maintained.
Don’t Settle For Too Expensive Ones
The price of a ball joint varies depending on the quality of materials and the brand.
The most expensive ones are usually those that have been designed with maximum lifespan in mind. However, there is not a whole lot of difference between them.
So, if you think it would be better to settle for the most expensive ball joint available for your truck, you would be wrong.
Do Check The Mounting
There are four different options for mounting:
- Bolt On
- Press In
- Riveted
- Unitized
Unitized joints have a completely integrated design. They have the ball joint and the control arm assembly connected. Bolt-on ones are easy to replace and service.
The least used ones are the press-in and riveted joints. These are typically extremely hard to remove. Press-in ball joints need special tools, while riveted ones need a drill to be taken out.
Frequently Asked Questions
Q1. How Long Does It Take To Install A Ball Joint In RAM 2500?
Hardly 10-15min tops, but this is if you’re doing it yourself and you have enough knowledge of your RAM 2500 truck.
If not getting it professionally done requires time usually, they ask for you to come with your car to where ever their ware shop lies and give you a time of when they will return the vehicle, so the better pro here is to learn a bit so you can do it yourself easily.
Q2. What Is The Installation Cost Of The Ball Joint For RAM 2500?
The service cost is different for different ball joints. Normally it will be around $200-$260 for the labor cost.
If you can probably do it yourself, you can buy a more pricy version when it comes to buying products.
The installer will take a fee for installing of around $200 – $260 each one whether you install all four or just 2-3.
However, it’s important to know such little details yourself in case of emergency.
Q3. How Do I Replace A Ball Joint In My RAM 2500?
Depending on the ball joint you use, some come with pressed plates; with just enough pressure, you can take the previous ball joint right out and install a new one; some require screwing and a little bit of dodging here and there.
If you have the arm muscles for it, it takes minutes to replace it. In case of leftover residue, you might need to wash the part thoroughly before installing new joints.
Q4. When Should I Switch Out My Ball Joints Of My RAM 2500?
Changing them frequently is highly recommended; the greasing and lubrication process leave behind residue, which over time logs the joints; it’s better to replace them with new ones after a couple of drives.
If you’re an on-road driver, it will last a while for you, but roaders should change it before every hefty trip they make. It’s a smart way to go about it, and its way safer.
Q5. Is It Safe To Drive Without A Ball Joint?
Ball joints are very important to keep the wheel in control of the driver; having full power over your driving moves is crucial, especially off-road when the path is rocky and uneven.
Losing balance and control can result in serious injuries, which is very harmful to the upcoming.
Conclusion
Discussing the best ball joints for RAM 2500 was fun and exciting as we got to learn so much about ball joints and why they are so important.
Moreover, if you would ask me which one you should go for then I’d definitely recommend the Carli Suspension Extreme Duty Ball Joints is a must-have.
Learning something new every day, a beginner or not, having a little off-road adventure is a must when you are young a youthful, grab a pair of ball joints and start your smooth off-road experience right now; you can study and pick from the above ones.
I am Tahir Azam, and I have been writing amazing articles for TaxiHack for as long as I can remember. I know everything that is to know when it comes to automobiles and is always on top of industry news and developments. While I am not an expert by any means, I pride myself on knowing the ins and outs of many different problems and, of course, their solutions. The articles on our website are some of the best and well-researched content that you will find, and I spend countless hours making sure this remains to be true. This is why I ask you to take your time out and read some of my articles, especially if you find a topic that resonates with you or is something you are looking into. This way, you will find the perfect mix of information and tips on your desired topic. Learn more about Tahir.
